Странные ошибки про HDD в dmesg

Имеем вот такой комплект ошибок в dmesg:

[1545760.918827] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen
[1545760.918876] ata1.00: failed command: READ FPDMA QUEUED
[1545760.918908] ata1.00: cmd 60/10:00:b7:ef:69/00:00:06:00:00/40 tag 0 ncq 8192 in
[1545760.918909] res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[1545760.918997] ata1.00: status: { DRDY }
[1545760.919022] ata1.00: failed command: READ FPDMA QUEUED
[1545760.919053] ata1.00: cmd 60/08:08:ef:ef:69/00:00:06:00:00/40 tag 1 ncq 4096 in
[1545760.919054] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[1545760.919142] ata1.00: status: { DRDY }
[1545760.919166] ata1.00: failed command: READ FPDMA QUEUED
[1545760.919197] ata1.00: cmd 60/08:10:ef:ee:69/00:00:06:00:00/40 tag 2 ncq 4096 in
[1545760.919199] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[1545760.919286] ata1.00: status: { DRDY }
[1545760.919310] ata1.00: failed command: READ FPDMA QUEUED
[1545760.919341] ata1.00: cmd 60/08:18:07:ef:69/00:00:06:00:00/40 tag 3 ncq 4096 in
[1545760.919343] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[1545760.919430] ata1.00: status: { DRDY }
[1545760.919459] ata1: hard resetting link
[1545761.238312] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[1545761.309374] ata1.00: configured for UDMA/133
[1545761.309403] ata1.00: device reported invalid CHS sector 0
[1545761.309431] ata1.00: device reported invalid CHS sector 0
[1545761.309458] ata1.00: device reported invalid CHS sector 0
[1545761.309486] ata1.00: device reported invalid CHS sector 0
[1545761.309520] ata1: EH complete
[1670305.969322] sd 0:0:0:0: Attached scsi generic sg0 type 0
[1670305.969365] sd 1:0:0:0: Attached scsi generic sg1 type 0
[1670305.969404] sd 4:0:0:0: Attached scsi generic sg2 type 0
[1670305.969444] sd 5:0:0:0: Attached scsi generic sg3 type 0

Тут проблема в том, что не указано, какой диск сбоит (sda, sdb, sdc или sdd), а лишь указано, что это "ata1.00". Как это расшифровать я пока что не знаю. Сейчас посмотрим в коде ядра и добавим :)